| Last additions - Members Galleries |
P1010012~0.JPGpistons94 viewsPrepping the internals.4x4eventsSep 05, 2006
|
|
P1010013.JPGpistons113 viewsPistons sorted on the table.4x4eventsSep 05, 2006
|
|
P1010014.JPGpistons99 viewsPistons sorted on the table.4x4eventsSep 05, 2006
|
|
P1010015.JPGblock95 viewsEngine block painted.4x4eventsSep 05, 2006
|
|
P1010006~0.JPGblock110 viewsEngine block in the back of the truck. Fresh from the machine shop.4x4eventsSep 05, 2006
|
|
P1010007~0.JPGpistons110 viewsPicture of the pistons and rods.4x4eventsSep 05, 2006
|
|
P1010008~0.JPGflywheel134 viewsPicture of the flywheel.4x4eventsSep 05, 2006
|
|
P1010009~0.JPGblock101 viewsBlock ready for paint.4x4eventsSep 05, 2006
|
|
P1010010~0.JPGblock98 viewsEngine block being taped off for painting.4x4eventsSep 05, 2006
|
|
P1010001~0.JPGgaskets119 viewsBox of new gaskets and timing gears.4x4eventsSep 05, 2006
|
|
P1010002~0.JPGpiston111 viewsPicture of the new Hypereutectic piston and connecting rod.4x4eventsSep 05, 2006
|
|
P1010003~0.JPGpiston109 viewsCloseup of the new .030 over Hypereutectic piston.4x4eventsSep 05, 2006
|
|
P1010004~0.JPGcrank102 viewsPicture of the crank. Had the crank mains and connecting rods
turned .010 and .010.4x4eventsSep 05, 2006
|
|
P1010005~0.JPGblock98 viewsEngine block back from the machine shop. The cylinders
were bored .030 over. Motor is now a 355 ci.4x4eventsSep 05, 2006
|
|
P4080112.JPGmotor137 viewsJust about finished.4x4eventsAug 29, 2006
|
|
P4110113.JPGnose123 viewsMotor is done, just need the nose put back on.4x4eventsAug 29, 2006
|
|
P4110116.JPGmotor100 viewsMost things done now.4x4eventsAug 29, 2006
|
|
P4080107.JPGmotor130 viewsA few more things and we are complete.4x4eventsAug 29, 2006
|
|
P4080108.JPGmotor179 viewsOnly a few items left to go.4x4eventsAug 29, 2006
|
|
P4080109.JPGmotor131 viewsMotor almost done.4x4eventsAug 29, 2006
|
|
P4080110.JPGmotor140 viewsMotor almost done and rail has been painted.4x4eventsAug 29, 2006
|
|
P4080111.JPGmotor132 viewsMotor almost done.4x4eventsAug 29, 2006
|
|
P5270085.JPGprogress131 viewsGetting more work done. Frame rail painted as well.4x4eventsAug 29, 2006
|
|
P5270086.JPGrockers119 viewsView of new 1.6 ratio roller rockers going on. I also upgraded to 7/16 screw in rocker studs.4x4eventsAug 29, 2006
|
|
P5270087.JPGengine125 viewsView of engine.4x4eventsAug 29, 2006
|
|
P4040105.JPGbrakes114 viewsCompleted brakes.4x4eventsAug 29, 2006
|
|
P4040106.JPGbrakes136 viewsCompleted brake.4x4eventsAug 29, 2006
|
|
P4040103.JPGbrackets115 viewsEngine brackets.4x4eventsAug 29, 2006
|
|
P4040104.JPGcolor133 viewsEngine going back together. (rocker covers were powder coated the wrong color of black, took them back and got them red, now they don't match the intake. Too much orange tint in them now. Going back again for another try.)4x4eventsAug 29, 2006
|
|
P5270082.JPGengine131 viewsView of engine bay as work moves on.4x4eventsAug 29, 2006
|
|
P5270083.JPGmotor128 viewsMotor going back together.4x4eventsAug 29, 2006
|
|
P5270084.JPGengine96 viewsView of motor rebuild test fitting water pump. (new water pump with an original cover.)4x4eventsAug 29, 2006
|
|
P5280096~0.JPGparts99 viewsView of parts on the skid.4x4eventsAug 28, 2006
|
|
P5280097~0.JPGparts137 viewsAll the finished parts laid out.4x4eventsAug 28, 2006
|
|
P5280098.JPGparts127 viewsCompleted parts.4x4eventsAug 28, 2006
|
|
P5280099.JPGparts135 viewsHood spring and brackets.4x4eventsAug 28, 2006
|
|
P5270092.JPGpart128 viewsAnother shot of the bumper frame with new paint.4x4eventsAug 28, 2006
|
|
P5270094.JPGparts122 viewsFinished peices wrapped up. Was like Christmas.4x4eventsAug 28, 2006
|
|
P5270095.JPGbracket115 viewsPic of engine bracket. (powder coated the wrong color.)4x4eventsAug 28, 2006
|
|
P5260074.JPGintake132 viewsIntake is powder coated.4x4eventsAug 28, 2006
|
|
P5270080.JPGparts125 viewsFinished parts shrink wrapped, ready for me to take home.4x4eventsAug 28, 2006
|
|
P5270090.JPGparts143 viewsJust got the part back. Still unwrapping them.4x4eventsAug 28, 2006
|
|
P5270091.JPGcover129 viewsWater pump cover.4x4eventsAug 28, 2006
|
|
P5270093.JPGbumper121 viewsPic of bumper frame cleaned and repainted.4x4eventsAug 28, 2006
|
|
P5260079.JPGparts108 viewsParts completed on skid.4x4eventsAug 28, 2006
|
|
P5240070.JPGsupport127 viewsRadiator support after being blasted.4x4eventsAug 28, 2006
|
|
P5260071.JPGparts129 viewsParts completed.4x4eventsAug 28, 2006
|
|
P5260072.JPGheader133 viewsHeader cermachromed.4x4eventsAug 28, 2006
|
|
P5260073.JPGpart139 viewsWater pump cover.4x4eventsAug 28, 2006
|
|
P5260075.JPGpart101 viewsAir pipe out from powder coating.4x4eventsAug 28, 2006
|
|
P5240065.JPGparts126 viewsBlasted plate holder.4x4eventsAug 28, 2006
|
|
P5240066.JPGparts134 viewsBlasted bracket.4x4eventsAug 28, 2006
|
|
P5240067.JPGparts128 viewsBlasted rotors. Finished surface was masked off.4x4eventsAug 28, 2006
|
|
P5240068.JPGparts123 viewsBlasted parts on skid.4x4eventsAug 28, 2006
|
|
P5240069.JPGparts124 viewsBlasted parts on skid.4x4eventsAug 28, 2006
|
|
P5240060.JPGparts126 viewsBlasted intake.4x4eventsAug 28, 2006
|
|
P5240061.JPGparts132 viewsBlasted header.4x4eventsAug 28, 2006
|
|
P5240062.JPGparts131 viewsBlasted rocker cover.4x4eventsAug 28, 2006
|
|
P5240063.JPGparts126 viewsBlasted radiator support.4x4eventsAug 28, 2006
|
|
P5240064.JPGparts187 viewsBlasted calipers (front and rear) and water pump cover.4x4eventsAug 28, 2006
|
|
P5210055.JPGparts182 viewsPainted some parts that are going to be re-used.4x4eventsAug 28, 2006
|
|
P5210056.JPGblock117 viewsBlock covered to prevent FOD.4x4eventsAug 28, 2006
|
|
P5210057.JPGparts120 viewsCam and fuel rails.4x4eventsAug 28, 2006
|
|
P5210058.JPGcover130 viewsTiming cover.4x4eventsAug 28, 2006
|
|
P5240059.JPGsand_blasting114 viewsParts out from sand blasting.4x4eventsAug 28, 2006
|
|
P5210050.JPGbearings131 viewsView of all the cam bearings.4x4eventsAug 28, 2006
|
|
P5210051.JPGcam127 viewsCam and timing cover.4x4eventsAug 28, 2006
|
|
P5210052.JPGparts123 viewsNew engine parts.4x4eventsAug 28, 2006
|
|
P5210053.JPGgaskets183 viewsNew gaskets.4x4eventsAug 28, 2006
|
|
P5210054.JPGblock123 viewsBlock covered to prevent FOD.4x4eventsAug 28, 2006
|
|
P5180045.JPGparts116 viewsBox-O-parts ready for powder coating.4x4eventsAug 28, 2006
|
|
P5180046.JPGtanks126 viewsWasher fluid and overflow tank.4x4eventsAug 28, 2006
|
|
P5180047.JPGhoses141 viewsHoses stashed away.4x4eventsAug 28, 2006
|
|
P5180048.JPGparts121 viewsMore parts.4x4eventsAug 28, 2006
|
|
P5210049.JPGblock125 viewsBlock covered to prevent FOD.4x4eventsAug 28, 2006
|
|
P5180040.JPGparts130 viewsParts on the cart.4x4eventsAug 28, 2006
|
|
P5180041.JPGheads125 viewsOld cylinder head.4x4eventsAug 28, 2006
|
|
P5180042.JPGwater_pump117 viewsOld water pump.4x4eventsAug 28, 2006
|
|
P5180043.JPGparts178 viewsParts loaded in the back of my truck.4x4eventsAug 28, 2006
|
|
P5180044.JPGtruck123 viewsParts loaded in the back of my truck.4x4eventsAug 28, 2006
|
|
P5180035.JPGdecal95 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4eventsAug 28, 2006
|
|
P5180036.JPGdecal173 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4eventsAug 28, 2006
|
|
P5180037.JPGradiator_support117 viewsRadiator support ready for powder coating.4x4eventsAug 28, 2006
|
|
P5180038.JPGcar115 viewsCar sitting on the jacks.4x4eventsAug 28, 2006
|
|
P5180039.JPGparts110 viewsParts stacked on cart.4x4eventsAug 28, 2006
|
|
P5180030.JPGengine120 viewsView of timing gears.4x4eventsAug 28, 2006
|
|
P5180031.JPGabs110 viewsClose-up of ABS unit, steering box and frame rail.4x4eventsAug 28, 2006
|
|
P5180032.JPGengine114 viewsView of engine block from driver side fender.4x4eventsAug 28, 2006
|
|
P5180033.JPGengine117 viewsView of engine block from passenger fender.4x4eventsAug 28, 2006
|
|
P5180034.JPGdecal109 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4eventsAug 28, 2006
|
|
P5180025.JPGfront110 viewsFront shot of engine bay.4x4eventsAug 28, 2006
|
|
P5180026.JPGfront166 viewsView of front of car.4x4eventsAug 28, 2006
|
|
P5180027.JPGpassenger_fender118 viewsView from passenger side fender.4x4eventsAug 28, 2006
|
|
P5180028.JPGfront118 viewsPic of front of car.4x4eventsAug 28, 2006
|
|
P5180029.JPGfender93 viewsPassenger side inner fender. More discoloration from coolant and acid.4x4eventsAug 28, 2006
|
|
P5180020.JPGradiator120 viewsRadiator up against the wall.4x4eventsAug 28, 2006
|
|
P5180021.JPGrotors111 viewsParts ready for powder coating.4x4eventsAug 28, 2006
|
|
P5180022.JPGheaders122 viewsHeaders ready to go to cermachrome. (ceramic/coating)4x4eventsAug 28, 2006
|
|
P5180023.JPGparts113 viewsBox-O-parts ready to go to powder coating.4x4eventsAug 28, 2006
|
|
P5180024.JPGdriver_fender188 viewsDriver's side inner fender.4x4eventsAug 28, 2006
|
|
| 2507 files on 26 page(s) |
 |
|
|
21 | |
|
|
