| Most viewed - Car Rebuild album |

P5240064.JPGparts158 viewsBlasted calipers (front and rear) and water pump cover.4x4events
|
|

P5210053.JPGgaskets157 viewsNew gaskets.4x4events
|
|

P5180024.JPGdriver_fender155 viewsDriver's side inner fender.4x4events
|
|

P4080108.JPGmotor153 viewsOnly a few items left to go.4x4events
|
|

P5210055.JPGparts153 viewsPainted some parts that are going to be re-used.4x4events
|
|

P5180043.JPGparts149 viewsParts loaded in the back of my truck.4x4events
|
|

P5180036.JPGdecal145 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4events
|
|

P5180026.JPGfront137 viewsView of front of car.4x4events
|
|

P4080110.JPGmotor113 viewsMotor almost done and rail has been painted.4x4events
|
|

P4080112.JPGmotor113 viewsJust about finished.4x4events
|
|

P5280097~0.JPGparts113 viewsAll the finished parts laid out.4x4events
|
|

P5260073.JPGpart111 viewsWater pump cover.4x4events
|
|

P5270090.JPGparts111 viewsJust got the part back. Still unwrapping them.4x4events
|
|

P5180047.JPGhoses110 viewsHoses stashed away.4x4events
|
|

P4040104.JPGcolor108 viewsEngine going back together. (rocker covers were powder coated the wrong color of black, took them back and got them red, now they don't match the intake. Too much orange tint in them now. Going back again for another try.)4x4events
|
|

P5240066.JPGparts107 viewsBlasted bracket.4x4events
|
|

P4080111.JPGmotor106 viewsMotor almost done.4x4events
|
|

P5210050.JPGbearings106 viewsView of all the cam bearings.4x4events
|
|

P5260072.JPGheader106 viewsHeader cermachromed.4x4events
|
|

P5240061.JPGparts105 viewsBlasted header.4x4events
|
|

P5240062.JPGparts105 viewsBlasted rocker cover.4x4events
|
|

P4040106.JPGbrakes104 viewsCompleted brake.4x4events
|
|

P5240060.JPGparts104 viewsBlasted intake.4x4events
|
|

P5240070.JPGsupport104 viewsRadiator support after being blasted.4x4events
|
|

P5260071.JPGparts104 viewsParts completed.4x4events
|
|

P5280099.JPGparts104 viewsHood spring and brackets.4x4events
|
|

P5270085.JPGprogress103 viewsGetting more work done. Frame rail painted as well.4x4events
|
|

P4080109.JPGmotor102 viewsMotor almost done.4x4events
|
|

P5180046.JPGtanks101 viewsWasher fluid and overflow tank.4x4events
|
|

P5210051.JPGcam101 viewsCam and timing cover.4x4events
|
|

P5210052.JPGparts101 viewsNew engine parts.4x4events
|
|

P5210058.JPGcover101 viewsTiming cover.4x4events
|
|

P5180048.JPGparts100 viewsMore parts.4x4events
|
|

P5210054.JPGblock100 viewsBlock covered to prevent FOD.4x4events
|
|

P5240065.JPGparts100 viewsBlasted plate holder.4x4events
|
|

P5240069.JPGparts100 viewsBlasted parts on skid.4x4events
|
|

P5270083.JPGmotor100 viewsMotor going back together.4x4events
|
|

P5270091.JPGcover100 viewsWater pump cover.4x4events
|
|

P4080107.JPGmotor99 viewsA few more things and we are complete.4x4events
|
|

P5180019.JPGsupport99 viewsRadiator support frame. Brown discoloration caused from coolant and battery acid.4x4events
|
|

P5260074.JPGintake99 viewsIntake is powder coated.4x4events
|
|

P5270080.JPGparts99 viewsFinished parts shrink wrapped, ready for me to take home.4x4events
|
|

P5270092.JPGpart99 viewsAnother shot of the bumper frame with new paint.4x4events
|
|

P5280098.JPGparts99 viewsCompleted parts.4x4events
|
|

P4110113.JPGnose98 viewsMotor is done, just need the nose put back on.4x4events
|
|

P5180022.JPGheaders98 viewsHeaders ready to go to cermachrome. (ceramic/coating)4x4events
|
|

P5180041.JPGheads98 viewsOld cylinder head.4x4events
|
|

P5240063.JPGparts98 viewsBlasted radiator support.4x4events
|
|

P5240067.JPGparts98 viewsBlasted rotors. Finished surface was masked off.4x4events
|
|

P5180040.JPGparts97 viewsParts on the cart.4x4events
|
|

P5210049.JPGblock97 viewsBlock covered to prevent FOD.4x4events
|
|

P5270082.JPGengine97 viewsView of engine bay as work moves on.4x4events
|
|

P5180017.JPGparts96 viewsParts stacked on the cart.4x4events
|
|

P5180020.JPGradiator96 viewsRadiator up against the wall.4x4events
|
|

P5180011.JPGparts95 viewsSome parts removed from the car.4x4events
|
|

P5180014.JPGhardware95 viewsAll the hardware bagged and tagged. (so you can remember where that funny washer goes, or that odd length bolt.)4x4events
|
|

P5180015.JPGintake95 viewsCAI...Cold Air Intake4x4events
|
|

P5180044.JPGtruck95 viewsParts loaded in the back of my truck.4x4events
|
|

P5240068.JPGparts95 viewsBlasted parts on skid.4x4events
|
|

P5180007.JPGaxle94 viewsPic of passenger side rear tire removed.4x4events
|
|

P5180042.JPGwater_pump94 viewsOld water pump.4x4events
|
|

P5270086.JPGrockers94 viewsView of new 1.6 ratio roller rockers going on. I also upgraded to 7/16 screw in rocker studs.4x4events
|
|

P5270093.JPGbumper94 viewsPic of bumper frame cleaned and repainted.4x4events
|
|

P5270087.JPGengine93 viewsView of engine.4x4events
|
|

P5180016.JPGhoses92 viewsHoses and plastic pieces sorted in their own area.4x4events
|
|

P5180023.JPGparts92 viewsBox-O-parts ready to go to powder coating.4x4events
|
|

P5180033.JPGengine92 viewsView of engine block from passenger fender.4x4events
|
|

P5180037.JPGradiator_support92 viewsRadiator support ready for powder coating.4x4events
|
|

P5180045.JPGparts92 viewsBox-O-parts ready for powder coating.4x4events
|
|

P5210056.JPGblock92 viewsBlock covered to prevent FOD.4x4events
|
|

P5210057.JPGparts92 viewsCam and fuel rails.4x4events
|
|

P5240059.JPGsand_blasting92 viewsParts out from sand blasting.4x4events
|
|

P5270094.JPGparts92 viewsFinished peices wrapped up. Was like Christmas.4x4events
|
|

P4040105.JPGbrakes90 viewsCompleted brakes.4x4events
|
|

P5180010~0.JPGparts90 viewsMore parts removed from the car.4x4events
|
|

P5180030.JPGengine90 viewsView of timing gears.4x4events
|
|

P5180038.JPGcar90 viewsCar sitting on the jacks.4x4events
|
|

P5180018.JPGparts89 viewsBrackets and alternator.4x4events
|
|

P5180028.JPGfront89 viewsPic of front of car.4x4events
|
|

P5180001.JPGfront88 viewsAngled front view of car coming apart.4x4events
|
|

P5180012.JPGbumper cover88 viewsPlastic nose that covers the bumper.4x4events
|
|

P5180021.JPGrotors88 viewsParts ready for powder coating.4x4events
|
|

P5180025.JPGfront88 viewsFront shot of engine bay.4x4events
|
|

P5180027.JPGpassenger_fender88 viewsView from passenger side fender.4x4events
|
|

P5180031.JPGabs88 viewsClose-up of ABS unit, steering box and frame rail.4x4events
|
|

P5270095.JPGbracket88 viewsPic of engine bracket. (powder coated the wrong color.)4x4events
|
|

P5180013.JPGhood87 viewsHood is removed.4x4events
|
|

P5180032.JPGengine87 viewsView of engine block from driver side fender.4x4events
|
|

P5180039.JPGparts87 viewsParts stacked on cart.4x4events
|
|

P5180008.JPGparts86 viewsParts removed from car being sorted on shop floor.4x4events
|
|

P5180034.JPGdecal86 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4events
|
|

P4040103.JPGbrackets84 viewsEngine brackets.4x4events
|
|

P5180002.JPGfender83 viewsFront view of car coming apart.4x4events
|
|

P5260075.JPGpart81 viewsAir pipe out from powder coating.4x4events
|
|

P5260079.JPGparts81 viewsParts completed on skid.4x4events
|
|

P5180005.JPGtrunk79 viewsStuff just being stored in the trunk.4x4events
|
|

P4110116.JPGmotor76 viewsMost things done now.4x4events
|
|

P5180004.JPGaxle76 viewsRear wheel removed on driver's side.4x4events
|
|

P5270084.JPGengine76 viewsView of motor rebuild test fitting water pump. (new water pump with an original cover.)4x4events
|
|

P5180029.JPGfender75 viewsPassenger side inner fender. More discoloration from coolant and acid.4x4events
|
|
| 105 files on 2 page(s) |
 |
1 |  |
|