| Most viewed - 4x4events's Gallery |
Big_Picture_1.JPeGbig_picture562 viewsPic of left wing of DHL A300.4x4events
|
|
my_other_car.jpegmy_other_car345 viewsPic of 9C1 at HOSS picnic.4x4events
|
|
P1010034.JPGhead194 viewsHead painted.4x4events
|
|
P1010026.JPGcam_bearings193 viewsPicture of the cam bearings.4x4events
|
|
P4080007.JPGparade_side172 viewsJennifer and Kayla patiently waiting for parade to start.4x4events
|
|
P1010032.JPGhead171 viewsMasking tape on the cylinder head.4x4events
|
|
P1010033.JPGheads169 viewsHeads being masked off.4x4events
|
|
P5180024.JPGdriver_fender169 viewsDriver's side inner fender.4x4events
|
|
P5240064.JPGparts169 viewsBlasted calipers (front and rear) and water pump cover.4x4events
|
|
P1010025.JPGblock168 viewsMotor going back together.4x4events
|
|
P5210053.JPGgaskets168 viewsNew gaskets.4x4events
|
|
P5210055.JPGparts168 viewsPainted some parts that are going to be re-used.4x4events
|
|
P4080008.JPGtruck_rear167 viewsBack view of the truck.4x4events
|
|
LH_WING.JPeGleft_wing.164 viewsPic of left wing.4x4events
|
|
P4080108.JPGmotor163 viewsOnly a few items left to go.4x4events
|
|
P1010010.JPGconnecting rod162 viewsPic of #1 connecting rod with small visible scratches.4x4events
|
|
P5180036.JPGdecal162 viewsPicture of decal that will be removed when the radiator support gets sand blasted.4x4events
|
|
P1010029.JPGpan161 viewsOil pan painted.4x4events
|
|
P5180043.JPGparts159 viewsParts loaded in the back of my truck.4x4events
|
|
P1010028.JPGhead156 viewsCylinder head ready for paint.4x4events
|
|
RH_Gear_1.JPeGright_gear.156 viewsPic of right gear.4x4events
|
|
Impalafest_2006_626.jpeg155 viewsPicture taken during Impalafest 2006.4x4events
|
|
P4080015.JPGfront_view154 viewsPic of front with bow taped down because of the wind.4x4events
|
|
P1010006.JPGbearing part.152 viewsPic showing bearing fragments on engine block.4x4events
|
|
P4080003.JPGtruck152 viewsPic of another truck at Sonic.4x4events
|
|
P1010027.JPGhead149 viewsCylinder head.4x4events
|
|
P5180026.JPGfront145 viewsView of front of car.4x4events
|
|
P1010021.JPGcrank144 viewsCrank is installed.4x4events
|
|
front_seat~0.jpegfront_seat138 viewsPic of front seat.4x4events
|
|
p_rear.jpegpassenger_rear.136 viewsPic showing passenger rear.4x4events
|
|
P4080110.JPGmotor127 viewsMotor almost done and rail has been painted.4x4events
|
|
P5260073.JPGpart127 viewsWater pump cover.4x4events
|
|
P1010030.JPGpan126 viewsOil pan painted.4x4events
|
|
P4080112.JPGmotor124 viewsJust about finished.4x4events
|
|
P5280097~0.JPGparts124 viewsAll the finished parts laid out.4x4events
|
|
P5180047.JPGhoses122 viewsHoses stashed away.4x4events
|
|
P5270090.JPGparts122 viewsJust got the part back. Still unwrapping them.4x4events
|
|
P5260072.JPGheader121 viewsHeader cermachromed.4x4events
|
|
P5260071.JPGparts119 viewsParts completed.4x4events
|
|
P5240061.JPGparts118 viewsBlasted header.4x4events
|
|
P4040104.JPGcolor117 viewsEngine going back together. (rocker covers were powder coated the wrong color of black, took them back and got them red, now they don't match the intake. Too much orange tint in them now. Going back again for another try.)4x4events
|
|
P5180019.JPGsupport116 viewsRadiator support frame. Brown discoloration caused from coolant and battery acid.4x4events
|
|
P1010008~0.JPGflywheel115 viewsPicture of the flywheel.4x4events
|
|
P5240066.JPGparts115 viewsBlasted bracket.4x4events
|
|
P5270085.JPGprogress115 viewsGetting more work done. Frame rail painted as well.4x4events
|
|
P1010120.JPGengine114 viewsDriver's side engine bay.4x4events
|
|
P4080111.JPGmotor114 viewsMotor almost done.4x4events
|
|
P5240070.JPGsupport114 viewsRadiator support after being blasted.4x4events
|
|
P5280099.JPGparts114 viewsHood spring and brackets.4x4events
|
|
P5180046.JPGtanks113 viewsWasher fluid and overflow tank.4x4events
|
|
P5210051.JPGcam113 viewsCam and timing cover.4x4events
|
|
P5270083.JPGmotor113 viewsMotor going back together.4x4events
|
|
P4080109.JPGmotor112 viewsMotor almost done.4x4events
|
|
P4110113.JPGnose112 viewsMotor is done, just need the nose put back on.4x4events
|
|
P5270080.JPGparts112 viewsFinished parts shrink wrapped, ready for me to take home.4x4events
|
|
P5270091.JPGcover111 viewsWater pump cover.4x4events
|
|
2309F29709.jpegwing110 viewsPic of left wing.4x4events
|
|
P4040106.JPGbrakes110 viewsCompleted brake.4x4events
|
|
P5210054.JPGblock110 viewsBlock covered to prevent FOD.4x4events
|
|
P5240067.JPGparts110 viewsBlasted rotors. Finished surface was masked off.4x4events
|
|
P5180020.JPGradiator109 viewsRadiator up against the wall.4x4events
|
|
P5210050.JPGbearings109 viewsView of all the cam bearings.4x4events
|
|
P5240060.JPGparts109 viewsBlasted intake.4x4events
|
|
LH_Gear~0.JPeGleft_gear108 viewsPic of left gear.4x4events
|
|
P5180011.JPGparts108 viewsSome parts removed from the car.4x4events
|
|
P5180017.JPGparts108 viewsParts stacked on the cart.4x4events
|
|
P5180048.JPGparts108 viewsMore parts.4x4events
|
|
P5210052.JPGparts108 viewsNew engine parts.4x4events
|
|
P5240062.JPGparts108 viewsBlasted rocker cover.4x4events
|
|
P1010001~0.JPGgaskets107 viewsBox of new gaskets and timing gears.4x4events
|
|
P4080020.JPGband107 viewsPic of School Band.4x4events
|
|
P5180040.JPGparts107 viewsParts on the cart.4x4events
|
|
P5210049.JPGblock107 viewsBlock covered to prevent FOD.4x4events
|
|
P5210058.JPGcover107 viewsTiming cover.4x4events
|
|
P5240065.JPGparts107 viewsBlasted plate holder.4x4events
|
|
P5270082.JPGengine107 viewsView of engine bay as work moves on.4x4events
|
|
P5280098.JPGparts107 viewsCompleted parts.4x4events
|
|
Point_of_Entry_1.JPeGentry_point107 viewsPic of point of entry.4x4events
|
|
P4080107.JPGmotor106 viewsA few more things and we are complete.4x4events
|
|
P5180022.JPGheaders106 viewsHeaders ready to go to cermachrome. (ceramic/coating)4x4events
|
|
P5240069.JPGparts106 viewsBlasted parts on skid.4x4events
|
|
P5260074.JPGintake106 viewsIntake is powder coated.4x4events
|
|
P5210057.JPGparts105 viewsCam and fuel rails.4x4events
|
|
P5270087.JPGengine105 viewsView of engine.4x4events
|
|
Point_of_Entry.JPeGentry_point105 viewsPic showing point of entry.4x4events
|
|
DLL_Rear_Spar_1.JPeGrear_spar104 viewsPic of rear spar.4x4events
|
|
P5180016.JPGhoses104 viewsHoses and plastic pieces sorted in their own area.4x4events
|
|
P5210056.JPGblock104 viewsBlock covered to prevent FOD.4x4events
|
|
P5240063.JPGparts104 viewsBlasted radiator support.4x4events
|
|
P5240068.JPGparts104 viewsBlasted parts on skid.4x4events
|
|
P5270086.JPGrockers104 viewsView of new 1.6 ratio roller rockers going on. I also upgraded to 7/16 screw in rocker studs.4x4events
|
|
P1010002~0.JPGpiston103 viewsPicture of the new Hypereutectic piston and connecting rod.4x4events
|
|
P5180007.JPGaxle103 viewsPic of passenger side rear tire removed.4x4events
|
|
P5180014.JPGhardware103 viewsAll the hardware bagged and tagged. (so you can remember where that funny washer goes, or that odd length bolt.)4x4events
|
|
P5180015.JPGintake103 viewsCAI...Cold Air Intake4x4events
|
|
P5180044.JPGtruck103 viewsParts loaded in the back of my truck.4x4events
|
|
P5180045.JPGparts103 viewsBox-O-parts ready for powder coating.4x4events
|
|
P5240059.JPGsand_blasting103 viewsParts out from sand blasting.4x4events
|
|
P5270092.JPGpart103 viewsAnother shot of the bumper frame with new paint.4x4events
|
|
P5270094.JPGparts103 viewsFinished peices wrapped up. Was like Christmas.4x4events
|
|
|
|
